WorkPro LightShark LS-Node2
WorkProRDM/DMX streaming device. 2 input, 2 output. Compatible with LightShark
2 bidirectional univese node. ArtNet, RDM & sACN.
- 2 RDM/DMX input and output.
- Ethernet-RDM/DMX bidirectional transceiver.
- Every port independently configurated.
- Merger HTP/LTP mode.
- Backup mode.
- Supports sACN, ArtNet/RDM/DMX.
- Integrated Ethernet switch.
- DMX frame rate configurable.
- PoE (Power over Ethernet) powered.
- 1/4 rack 19'' enclosure.
The LS-Node series is the new RDM/DMX streaming range from WORK PRO that supports industry standards ArtNet & sACN. They feature from 1 up to 4 DMX universes, with 3 different models: LS-Node1, LS-Node2 & LS-Node4, each of which adds its respective number of freely configurable DMX universes.
These small LS-Node products are available in the same quarter-rack physical format as the original LS-Core, are powered via a compact USB-C connector or by PoE, which is helpful when used in installations where they may be rack-mounted with an optional LS-AR 19 rack chassis.
All LS-Node products come with an integrated Ethernet switch with 2 ports and are multiprotocol, supporting the industry standards ArtNet and sACN.
LS-Node is fully compatible with LightShark consoles and can also be configured via a webserver, through which users can set up parameters like DMX frame rate (from 15 to 40 frames/s), firmware upgrades, independent RDM/DMX ports routing (any universe can be routed to any of the RDM/DMX ports independently) and modes of use.
With ArtNet/RDM compatibility, LS-Node allows configuration, status monitoring and management of remote devices from lighting consoles.
All the models feature several modes of use:
- Single Mode: DMX to ArtNet/sACN transceiver (LS-Node1 & LS-Node2 models) configurable via web.
- Merger mode: where the LS-Nodes can receive different universes (via ArtNet/sACN or DMX) and merge them in the same output, being able to select HTP/LTP merge modes.
- Backup mode: When LS-Node works in Backup mode with two consoles connected, the device can detect a loss of connection from the primary console and automatically switch to the backup console with a max latency of 3 seconds.
- ÄÄNENTOISTOLAITTEET
- VALAISTUSLAITTEET
-
TRUSSIT | TELINEET | STAGET
-
TRUSSIT
- Trussi & Teline setit
- Ympyrätrussit
- Truss Furniture
- Roof Systems
- Truss Tower systems
- PA Towers
- LED Screen Constructions
-
ALUTRUSS TRUSSIT
- Singlelock SP 1 | 1-pistetrussi
- Decolock DQ2 | 2-pistetrussi
- Bilock BQ2 | 2-pistetrussi
- Bilock E-GL22 | 2-pistetrussi
- Decolock NDQ3 | 3-pistetrussi
- Decolock DQ3 | 3-pistetrussi
- Trilock 6082 | 3-pistetrussi
- Decotruss Quad | 4-pistetrussi
- Decolock DQ4 | 4-pistetrussi
- Quadlock 6082 | 4-pistetrussi
- Quadlock QL-ET | 4-pistetrussi
- Quadlock TQ390 | 4-pistetrussi
- Quadlock GL400 | 4-pistetrussi
- Towertruss TQTR
- GUIL TRUSSIT
- ALUSTAGE TRUSSIT
- SHOWTEC | MILOS TRUSSIT
- ALSPAW TRUSSIT
- TELINEET
- TRUSSI & TELINE TARVIKKEET
- MOBILE STAGES | STANDS
-
TRUSSIT
- TAPAHTUMATEKNIIKKA
- SOITTIMET
- SISUSTUS | DECORATION
- KAMERAT & TARVIKKEET
- URHEILU | HYVINVOINTI
- PUHELIN | PC | TARVIKKEET
- KOTI | ASUMINEN | VAPAA-AIKA
- TYÖVAATTEET | SUOJAVARUSTEET
- DRONET | RPAS | UAV | ROV | ...
- RADIOLAITTEET
- PELIT & VIIHDE
- VUOKRAUS