Voice-Acoustic HDSP 4A, 6400W DSP Amplifier
Voice-Acoustic HDSP 4A, 6400W DSP Amplifier Voice-Acoustic HDSP 4A, 6400W DSP Amplifier

Voice-Acoustic HDSP 4A, 6400W DSP Amplifier

5 429,00 €
Sisältää alv. 24.00 %

The HDSP-4A is a 4-channel DSP amplifier with dual technology and has an output power of 6.400 W into 4 Ω.

Toimitusaika 5 - 14 työpäivää
Tuotenumero 309000401
  • 6.400 W, 2 x 2.400 W + 2 x 800 W an 4 Ohm
  • 4 channel DSP amplifier with dual-technology
  • 2 power supplys, DSP-boards and Class-D module
  • Integrated loudspeaker management systems (DSP) with audiophile sound quality
  • 2 x 80 preset locations, including 2 different presets assignable simultaneously
  • Software control via Ethernet interface and USB
  • Intelligent wide-range switching power supplies with automatic worldwide voltage adjustment
  • Dust protected by modular upside-down board assembly
  • Very quiet, temperature controlled low-noise EBM Papst fan
  • Tough, road-ready, stable and yet light aluminum housing

The HDSP-4A is a 4-channel DSP amplifier with dual technology and has an output power of 6.400 W into 4 Ohm.

The Voice-Acoustic HDSP amplifier series has been developed with the most demanding requirements in audio quality and reliability in mind. With the high number of output channels, for the first time, it has become possible to separately filter bi and tri amping with the HDSP series cost effectively. The intelligent wide-range switching power supply automatically detects the AC input values making it possible to use anywhere in the world.

The integrated loudspeaker management systems (DSP – digital signaling processor) work with a 64 bit/96 kHz sampling rate in audiophile sound quality. Premium converters offer a 120 db dynamic range and can process an input level of up to + 23 dBu. This amplifier series is specked out with the factory settings for the speakers, limiter and time alignment for the output channels. Additionally each input channel boasts 10 parametric filters (Bell, High Shelf, Low Shelf, Notch, Allpass), compressors, flexible routing, phase settings, a lengthy delay section for delays up to 275 meters, and an input limiter. The series is also equipped with enough memory to add your own presets for the use of loudspeakers from other manufacturers. The amplifiers are likewise available without Voice-Acoustic factory presets.

The LCD display on the front side enables all functions to be manually accessed from a digital rotary encoder and buttons. Our Voice-Acoustic’s VA-WLAN remote software for PC, Mac or App offers even more convenient access to these controls. This software makes it possible to link, remotely operate and monitor up to 128 individual HDSP amplifier units or self-powered loudspeakers in one common network. Linking is accomplished fully automatically via IP-address. The connection operates bi-directionally in real-time and provides a diverse scope of system feedback (headroom, temperature, and impedance measurement).

One major advantage of Voice-Acoustic power amplifiers is their modular capability. Multiples of highly effective state-of-the-art Class-D modules are fitted with separate power supplies and separate DSP boards to endure redundancy and guarantee supreme operational safety. This easy-to-service modular style allows for simple and fast exchange of components by any electrical assistant in a short time. Compared to conventional multi-channel power amplifiers, which have to be powered with one power supply, the HDSP amplifier’s modular capabilities guarantee maximum performance and lots of headroom – even in a deep base range without simultaneously influencing other channels.

The electronics have been mounted upside-down in the super sturdy 19" aluminum housing. Any dust particles will float to the floor of the box and not lay down on the platinum. All 2HE power amplifiers have identical housing and back cover plates.

Voice-Acoustic Remote-Network

Voice-Acoustic remote-network

Technical Specifications:

  • Quantity channel: 4 CH, class-D latest generation
  • Power output 4 Ohm: 6.400 W (2 x 2.400 W + 2 x 800 W)
  • Power output 8 Ohm: 4.060 W (2 x 1.580 W + 2 x 450 W)
  • Power output 16 Ohm: 2.000 W (2 x 800 W + 2 x 200 W)
  • Damping factor: > 1000 / 8 Ohm, 1 kHz
  • Frequency responce: 20 - 20.000 Hz
  • THD+N: < 0,05 % (20 - 20.000 Hz with 8 Ohm)
  • Signal-to-noise ratio: > 118 dB (20 - 20.000 Hz with 8 Ohm)
  • Voltage: Intelligent PFC wide-range power supply with soft start and automatic voltage selection: 85 - 135 V = 110 / 115 / 120 V Betrieb, 190 - 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz
  • Powerconnector: 1 x 16 A Neutrik PowerCon IN
  • Signal connection analog INPUT/LINK: 4 x XLR female/male
  • Speaker Connections: 4 x Speakon
  • Network connection: 2 x Additional rear RJ45 socket for wired network in fixed installations
  • Cooling: 2 x temperature-controlled EBM-Papst low noise axial fan, air flow front to back
  • Protection: 
    • Input limiter, peak limiter
    • Start-up current limiting (soft start)
    • Protection circuit on and off transients
    • Under and over-voltage protection
    • DC-protection of outputs
    • Temperature monitoring of the heatsink and transistors
  • Realtime software-monitoring
    • Loudspeaker impedance measuring from each output channel (line-control)
    • Temperature measuring from each ampmodule
    • Real time meterbridge on PC per channel
    • Real time access for configuration on each channel
    • Speaker group building for access multiple speakers with one command
  • DSP sampling: 64 bit, 96 kHz sample rate
  • DSP preset memory quantity: 2 x 80 preset locations, including 2 different presets assignable simultaneously
  • Latency: 0 - max. 500 microsecond
  • Dynamic range input: 120 db
  • Nominal input level: + 6 dbu
  • Maximum input level: + 23 dbu
  • Limiter: Two per way, in each input and output
  • Filter: 10 parametric filter each in- and output, use as Bell, Shelving, Notch, or Allpass filter
  • Long delay section: 0 - 800 ms (max. 275 m delay) in each input
  • Short delay section: 0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers
  • Phase adjustment: 0 - 180°
  • X-Over: Butterworth, Bessel, Linkwitz-Riley Filter
  • Software: Bi-directional realtime VA-WLAN-remote network, software for PC and MAC
  • Manual hand operation: with 4 x button and 2 x digital encoder-wheel in the internal menu navigation, function lockable
  • Display:
    • 2 x LED display
    • 2 x LCD display with software dimmable and switchable
  • Body housing: 19"/2 HE, 430 mm deep, strong black colored aluminum housing
  • Weight: 7,2 kg
Samankaltaiset tuotteet