Showtec Solaris 3.0 High-power RGB Laser with Pangolin FB4

Showtec Solaris 3.0 High-power RGB Laser with Pangolin FB4

• 3.000 mW Full-colour laser with Pangolin FB4, ILDA, and Art-Net control
• Free use of QuickShow software thanks to FB4 module
• Full colour spectrum thanks to analogue laser control
• 45° laser scan angle, scanning up to 30 kpps at 8°
• Low beam divergence (<1.6 mrad at full angle)

The Solaris 3.0 is a powerful 3.000-mW RGB laser projector with built-in Pangolin FB4 control module, intended for use in large venues. The FB4 module unlocks the award-winning QuickShow software, which means you can use this professional software completely free of charge. This opens up extensive possibilities for professional laser show control. It allows you to run your laser shows in a full network setup, controlled by the QuickShow software on your PC. You can also control it through your lighting console by Art-Net, and it features an SD card interface for saving automatic, stand-alone playback.

By using linear analogue dimming modulation, the Solaris 11.0 can generate the full spectrum of colours. Its very precise and high-quality construction ensure perfect matching of the RGB beams and distortion-free images. Its extra wide 45° beam angle allows for large projection areas. It comes with all the necessary safety measures, like scanning system overload protection, a keyed interlock system, scan-fail safety, aperture masking plate, emergency stop system, and a keyed remote.

SPECIFICATIONS

Source

• Laser Power: 3000 mW
• Laser Source: Diode
• Laser Modulation: Analog
• Laser Class: 4
• Laser Colour: Red, Green, Blue
• Laser Power Total: 3000 mW
• Laser Power Red: 700 mW
• Laser Wavelength Red: 637 nm
• Laser Power Green: 1000 mW
• Laser Wavelength Green: 520 nm
• Laser Power Blue: 1400 mW
• Laser Wavelength Blue: 445 nm

Control and Programming

• Control Mode: Art-Net, DMX, SD Card
• Display: OLED

Movement

• Laser Scan Angle max.: 45°

Electrical Specifications and Connections

• Power Supply: 100-240 VAC 50-60 Hz
• Power Consumption: 100 W
• Power Connector in: Power Pro True
• Power Connector out: Power Pro True
• Data Connector: RJ45 In/Out
• Data Connector in: RJ45
• Data Connector out: RJ45

Mechanical Specifications

• Height (mm): 220 mm
• Width (mm): 284 mm
• Depth (mm): 188 mm
• Weight: 5.1 kg
• IP Rating: IP20 (indoor use only)
• Housing: Aluminium
• Colour: Black

Product Properties

• Cooling: Axial fan
• Safety Features: Interlock, Key Switch, Safety Eye
• Laser Scanner: 30 kpps

Thermal Specifications

• Maximum Ambient Temperature: 40 °C

Rigging

• Mounting Options: Bracket, Floor
• Safety Attachment: Yes

Included Items

• Included Cables: Power Pro True Cable
• Included Accessories: Interlock key(s)
• Included Rigging: Bracket