PSSO Prime Set XXL

Set consisting of:

• 4x 11041172: PSSO PRIME-315 Club Speaker System
• 2x 11041178: PSSO PRIME-182 Subwoofer 3000W
• 2x 11041175: PSSO PRIME-12CX Coaxial Speaker, 400W
• 1x 10451696: PSSO QCA-6400 4-Channel SMPS Amplifier
• 1x 10451701: PSSO PRIME System Amplifier DSP

11041172 PSSO PRIME-315 Club Speaker System

Pro PA speaker, 2 x 15" woofer, 6.5" + 2 x 1.4" horn-loaded, 1800 W RMS (Biamp)

• Rugged pro PA speaker, qualified for suspension and clubs
• Biamp operation
• Housing made of 25 mm (17 layers) and 18 mm (13 layers) birch plywood
• Premium custom-made drivers by European manufacturer CELTO Acoustique
• 2 x 38 cm neodymium bass speaker (15") with diecast aluminum basket
• 16.5 cm neodymium midrange speaker (6.5") with diecast aluminum basket, 51 mm voice coil (2")
• 36 mm neodymium driver (1.4"), 72 mm voice coil (2.8")
• Bassreflex system
• Neutrik Speakon connectors
• Scratch-resistant lacquer surface
• Applications: standing or suspended

11041178 PSSO PRIME-182 Subwoofer 3000W

Pro PA bassreflex subwoofer, 2 x 18" woofer, 3000 W RMS, 4 ohms

• Rugged pro bassreflex subwoofer, qualified for clubs and touring applications
• Housing made of 25 mm (17 layers) and 18 mm (13 layers) birch plywood
• 2 x 45 cm (18") bass speaker, 115 mm voice coil (4.5"), diecast aluminum basket
• Premium custom-made drivers by European manufacturer CELTO Acoustique
• Parallel Neutrik Speakon connectors
• Metal flange for top speakers
• Carrying handles and rubber feet
• Scratch-resistant lacquer surface

11041175 PSSO PRIME-12CX Coaxial Speaker, 400W

Pro PA speaker, 12" woofer, 1" horn, 400 W RMS, 8 ohms

• Rugged full-range PA top speaker, qualified for suspension and clubs
• Housing made of 18 mm (13 layers) birch plywood
• Premium custom-made drivers by European manufacturer CELTO Acoustique
• 30 cm neodymium bass speaker (12") with diecast aluminum basket
• 36 mm neodymium driver (1.4"), 72 mm voice coil (2.8")
• Passive 2-way crossover
• Bassreflex system
• Parallel Neutrik Speakon connectors
• Movable mounting bracket for ceiling or wall installation
• Scratch-resistant lacquer surface
• Applications: standing, on a subwoofer or suspended

10451696 PSSO QCA-6400 4-Channel SMPS Amplifier

PA amplifier with SMPS, 4 x 1600 W / 2 ohms, 4 x 1400 W / 4 ohms

• 4-channel PA amplifier with class I circuitry
• 4 x 1400 W/4 ohms
• Low weight and height due to integrated switch mode power supply
• Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
• Speaker switch-on delay
• 3 operating modes can be selected (stereo, parallel or bridged)
• 4 level controls for precise level adjustment
• Input sensitivity adjustable
• LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
• Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
• Highly efficient front-to-rear air routing
• Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
• Speaker outputs via lockable Speaker plugs
• Rugged steel chassis with aluminum front panel
• Rack installation with 2 units
• Neutrik Speakon outputs

10451701 PSSO PRIME System Amplifier DSP

6 channel PA amp with SMPS, 2 x 2400 W, 4 x 800 W

• 6-channel PA amplifier with high-performance DSP, freely programmable
• Sample frequency: 96 kHz and 64-bit technology
• Premium components ensure excellent sound features
• Efficient class D amplifier circuitry
• 2 Pascal amplifier modules
• 4 analog inputs and 2 digital AES/EBU interfaces (XLR)
• 4 analog link outputs (XLR)
• 2 Neutrik Speakon outputs
• Neutrik Powercon mains input
• Real-time remote control via built-in Ethernet LAN interface
• User-friendly software for PC and Mac included
• 80 presets can be stored and activated
• Manual control via encoder, LCD screen and buttons at the front panel
• 120 dB dynamic range
• Flexible routing
• 10 parametric EQ
• X-Over: Bessel, Linkwitz-Riley, Butterworth with 24 dB/octave
• Delay
• Limiter and noise gate
• Phase reverse
• Password protection
• Low weight and height due to integrated switch mode power supply
• Automatic power supply adaption between 100 and 240 volts without power selector
• Intelligent mains fuse protection
• Input current limiter
• Protection against turn-on and turn-off transients
• DC protection of outputs
• Under and over voltage protection
• Temperature-controlled air-cooling
• High damping factor> 1000
• Low distortion, THD+N < 0.05 %
• Rugged steel chassis with anodized aluminum front panel
• Rack installation with 2 units
• Windows XP, Vista, 7, 8 and Mac OS X 10.5.8 and better
• Made in Germany