Palmer PB 20 Press Patch Box 20-Channel
Palmer PB 20 Press Patch Box 20-Channel Palmer PB 20 Press Patch Box 20-Channel Palmer PB 20 Press Patch Box 20-Channel Palmer PB 20 Press Patch Box 20-Channel Palmer PB 20 Press Patch Box 20-Channel Palmer PB 20 Press Patch Box 20-Channel

Palmer PB 20 Press Patch Box 20-Channel

Palmer
1 599,00 €
Sisältää alv. 24.00 %

A press patch box is a special audio signal splitter, which is developed for the specific requirements of a press conference.

Toimitusaika 4 - 7 työpäivää
Tuotenumero PPB20

Palmer PB 20 Press Patch Box 20-Channel

  • Signal distributor with 20 outputs
  • Isolated transformer-balanced XLR inputs for microphone and line level signals
  • High-quality input amplifier with gain control and +20 dB switch
  • 10 LEDs for level display from -40 to +10 dB
  • 20 transformer-balanced XLR outputs with paired driver circuitry and individual ground lift switches on the rear
  • 2 additional 6.35mm stereo jacks and RCA outputs
  • Nominal output Level +4 dBu/600 Ohms, jack and RCA outputs -10 dBu
  • Adjustable 6.35 mm headphone output
  • Summed input and cascaded output
  • Integrated shielded power supply
  • DC input for emergency power supply

A press patch box is a special audio signal splitter, which is developed for the specific requirements of a press conference. Via separate inputs, you can connect either a microphone or a line signal (mixer output).

Also available as a stereo version (PPB20S)

A high-quality input amplifier with balanced earth-free input allows for a level adjustment over a wide range. 20 transformer-balanced XLR/m jacks with individual driver circuits in pairs are available as outputs for video cameras or other sound recording devices.

The nominal output level is +4 dBu at 600 ohms. In addition, channels 19 and 20 are equipped with TRS phone jacks for balanced or unbalanced signals and with RCA sockets (-10 dBu nominal level).

If more than 20 outputs are required, further PPB20 units can be cascaded via a BUS IN/OUT socket on the rear panel. A 10-fold LED chain and an adjustable headphone amplifier are used for signal monitoring (display range -40 to +10 dB, 0 dB display corresponds to +4 dBu output).

The PPB20 has a built-in shielded power pack. An additional DC input allows for battery operation or using an emergency power supply. PW4 is a suitable emergency power supply for two PPB20.


SPECIFICATIONS

  • Type: mic & line split
  • Split type: 1 in 20
  • Channels: 1
  • Inputs: 1
  • Input connectors: XLR
  • Max. input level: Mic: 0 dBu, Line: +20 dB
  • Adjustable input: Yes
  • Number of split-outputs per canal: 20
  • Max. output level: + 20 dB
  • Output connectors: 6.3 mm jack , RCA , XLR
  • Adjustable output: no
  • Transformer isolated outputs: Yes
  • Controls: attenuator , ground lift , input gain , mic/line switch , phones level
  • Indicators: input level , Power
  • Operating voltage: integrated (115 / 230 V)
  • Cabinet material: sheet steel
  • Cabinet surface: Powder coated
  • Width: 480 mm
  • Width: 19 "
  • Depth: 200 mm
  • Height: 135 mmHeight: 3 U
  • Weight: 9,09 kg