OMNITRONIC PAS MK3 Band Set

4 999,00 €

Sisältää alv. 24.00 %

Toimitusaika 4 - 7 työpäivää

Tuotenumero 20000746

PAS MK3 Band Set

Set consisting of:

11039482 OMNITRONIC PAS-215 MK3 2-Way Top

Passive speaker with 15" woofer, 1" driver and 400 W RMS

Rugged full-range top speaker, qualified for suspension
Trapezoidal, multi-functional multiplex cabinet with scratch-resistant lacquer surface
2-way bass-reflex system with 38 cm woofer (8 cm voice coil)
2.5 cm compression driver with ferrite magnet (3.8 cm voice coil with polymer diaphragm)
Parallel Speaker connections
Optimized for combination with PAS subwoofers
Dual flange with 0° and 5° tilt angle enables flexible positioning
M8 threaded inserts for suspended installation
Protective grille and recessed aluminum handlebars
Applications: standing, on a subwoofer or speaker stand, suspended

11039490 OMNITRONIC PAS-181 MK3 Subwoofer

Passive 18" bassreflex subwoofer with 900 W RMS, 8 ohms

60004559 OMNITRONIC Distance Tube Subwoofer/Satellite with Crank

Variable distance tube (M20 thread), height adjustable via crank 80-110 cm

10451697 PSSO QCA-10000 4-Channel SMPS Amplifier

PA amplifier with SMPS, 4 x 2150 W / 2 ohms, 4 x 2100 W / 4 ohms

4-channel PA amplifier with class I circuitry
4 x 2100 W/4 ohms
Low weight and height due to integrated switch mode power supply
Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
Speaker switch-on delay
3 operating modes can be selected (stereo, parallel or bridged)
4 level controls for precise level adjustment
Input sensitivity adjustable
LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
Highly efficient front-to-rear air routing
Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
Speaker outputs via lockable Speaker plugs
Rugged steel chassis with aluminum front panel
Rack installation with 2 units
Neutrik Speakon outputs
Housing design: (19") 48.3 cm rack installation 2 U

30109784 ROADINGER Amplifier Rack PR-2, 4U, 47cm deep

Flightcase for 483 mm units (19")

Profile rails with 4 U mounting facility for 483 mm units (19"), e.g. PA amplifiers, power packs, additional equipment
Front and rear rack rails
2 removable covers (double-door version)
Max. depth 420 mm (plus 90 mm per cover)
High-quality workmanship with plywood multilayered glued, black laminated
Aluminum profile frames (30 mm) with rounded edges
Three-leg, medium-sized steel ball corners
4 high-quality butterfly locks (w/o locking function)
2 wooden slide rails on the bottom
2 hinged, chrome case handles
Delivery includes mounting screws
Available in different height units (1 U = 44 mm)
Housing design: 4 U

10356321 OMNITRONIC DXO-24E Digital Controller

Digital stereo active crossover with 2 inputs and 4 outputs, incl. software

Flexible routing configurations for all standard mono and stereo output operating modes
2 analog inputs and 4 analog outputs (XLR)
Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presetsUp to 30 user
presets storable in the device via software
Alphanumeric LCD screen with 2 lines of 16 characters each
Input sensitivity digitally adjustable
Inputs and outputs with 4-digit LED level meter as well as clip and limit LED indicator
Mute switch with LED indicator per output
7-band parametric EQ per output
Up to 7 ms signal delay adjustable for the outputs
Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
Switchable phase
Lock function for protecting the program settings
Windows XP, Vista, 7, 10 and Mac OS X 10.5.8 and better
DSP: Digital signal processor
the device can be connected via USB to the PC in connection with the DXO Software
The firmware can be updated via the PC connection
Housing design: (19") 48.3 cm rack installation 1 U