Mobiletechlifts ML3 Line Array Lift
Mobiletechlifts ML3 Line Array Lift Mobiletechlifts ML3 Line Array Lift

Mobiletechlifts ML3 Line Array Lift

2 659,00 €
Sisältää alv. 24 %

Easy to load line array with double security for maximum safety and protection.

Toimitusaika 14 - 21 työpäivää
Tuotenumero ML3-5626

Mobiletechlifts ML3 Line Array Lift

  • Load: 260 kg (573 lbs)
  • Weight: 124 kg (273.37 lbs)
  • Max. Height: 5.6 m (18.37 ft)
  • Min. Height: 1.78 m (5.84 ft)
  • Footprint: 1.97 x 1.82 m (6.46 x 5.97 ft)
  • Sturdy trapezoidal thread: 0.45 m (1.48 ft)
  • Outrigger rubber pads: Yes
  • Level indicator: Yes
  • Height indicator: Yes
  • Rear support bars: Yes
  • PLS (pin locking system): Yes
  • Horizontal transport (opt.): Yes
  • Winch cover (optional): Yes

Key Benefits

  • Combination of pin locking system and spring key as a secondary safety feature when lifting
  • Increased spacing between hand winch and cable feed from roller ensures proper winding on winch drum
  • A unique loading system allows for safe and convenient attachment of hardware and truss at any position. Easy to use design allows crews to work faster and more safely. Load from almost ground level.
  • Firmly secures 4 legs and 2 stabilizer tubes

TUV NORD CERTIFIED

  • TÜV baumuster approval assures that all Mobiltechlifts lifts meet the requirements for structures, i.e. when the load is lifted and secured at trim height, the lifting equipment then becomes a structure and different regulations apply to the lifting operation.

CE

  • CE = Self-certified conformity declaration. In this case, the lifts fulfil the demands of European Machine directive 2006/42/EC.

DGUV-17

  • This statutory German accident prevention regulation applies to employers and insured persons in Germany, as well as employers and employees from foreign enterprises who perform work in Germany. BGVc1 (currently called DGUV 17) prescribes certain measures referring to applicable German standards, e.g. DIN 56950. This standard fills the gap by not only covering staging and machinery, addressed in EU Machinery Directive (2006/42/EC), but also machinery that this directive does not cover. The directive is implemented in Germany by the 9th Ordinance of the German Product Safety Act (Machinery Ordinance - 9th ProdSV). The directive excludes what it expresses as „machinery intended to move performers during artistic performances“. However, such machinery is not only used to „move performers during artistic performances“ but also to move or hold loads over persons, move or hold persons themselves not only during „artistic performances“ but also during stage construction, setting up scenary and rehearsals.

  • 5° test = A load testing requirement taken from DIN 58950 (safety requirements and inspections for stands and truss lifts of stands)