Mobiletechlifts ML2 6520 Telescopic Lift
Mobiletechlifts ML2 6520 Telescopic Lift Mobiletechlifts ML2 6520 Telescopic Lift

Mobiletechlifts ML2 6520 Telescopic Lift

2 290,00 €
Sisältää alv. 24.00 %

TÜV and BGV C1 certified telescopic lifts with industry-leading durability, top levels of safety and unmatched user-friendliness.

Toimitusaika 5 - 14 työpäivää
Tuotenumero ML2-6520

Mobiletechlifts ML2 6520 Telescopic Lift

  • Load: 200 kg (441 lbs)
  • Weight: 146 kg (321.87 lbs)
  • Max. Height: 6.5 m (21.33 ft)
  • Min. Height: 1.82 m (5.98 ft)
  • Footprint: 2.4 x 2.4 m (7.87 ft)
  • Level indicator: Yes
  • Height indicator: Yes
  • Top mast attachment points: Yes
  • Secondary locking mech.: Yes
  • Winch cover (optional): Yes
  • Manual screw (2nd point): Yes

Key Benefits

  • Telescopic outriggers increase practicality and improve stability
  • Integrated wheels with brakes and a bubble level
  • Rubber feet on the outriggers protect all surfaces from damage and provide increased friction
  • Plastic cushions on the lift’s body prevent damage to the mast

TUV NORD CERTIFIED

  • TÜV baumuster approval assures that all Mobiltechlifts lifts meet the requirements for structures, i.e. when the load is lifted and secured at trim height, the lifting equipment then becomes a structure and different regulations apply to the lifting operation.

CE

  • CE = Self-certified conformity declaration. In this case, the lifts fulfil the demands of European Machine directive 2006/42/EC.

DGUV-17

  • This statutory German accident prevention regulation applies to employers and insured persons in Germany, as well as employers and employees from foreign enterprises who perform work in Germany. BGVc1 (currently called DGUV 17) prescribes certain measures referring to applicable German standards, e.g. DIN 56950. This standard fills the gap by not only covering staging and machinery, addressed in EU Machinery Directive (2006/42/EC), but also machinery that this directive does not cover. The directive is implemented in Germany by the 9th Ordinance of the German Product Safety Act (Machinery Ordinance - 9th ProdSV). The directive excludes what it expresses as „machinery intended to move performers during artistic performances“. However, such machinery is not only used to „move performers during artistic performances“ but also to move or hold loads over persons, move or hold persons themselves not only during „artistic performances“ but also during stage construction, setting up scenary and rehearsals.

  • 5° test = A load testing requirement taken from DIN 58950 (safety requirements and inspections for stands and truss lifts of stands)