DAP COM-ART Wireless Audio System

The COM-ART is a PLL UHF wireless audio set. It contains one transmitter and one receiver. The smart and lightweight design enables you to plug the receiver directly on any amplifier or active speaker. Both transmitter and receiver can be powered by one AA battery or an USB power supply. It has a range up to 50 meters in an ideal situation. The frequency range 606-630 MHz is divided in 16 frequency channel presets.

To use the COM-ART for stereo purposes you will need 2 sets.

• Battery powered
• Up to 50m (line of sight)
• Receiver & Transmitter
• 16 Channels

SPECIFICATIONS

• Mono Inputs: 1
• Mono Input Connector: 3pole XLR
• Mono Input Impedance: 10.000 Ω
• Main Output Impedance: 600 Ω
• Main Output Connector: 3pole XLR
• Main Outputs: 1
• THD Distortion Level: < 0.3%
• Signal - Noise Ratio: > 98dB
• Frequency Response Minimum: 30 Hz
• Frequency Response Maximum: 17.000 Hz
• RF Bandwith: 30 MHz
• Wireless Audio Frequency Band End: 630 MHz
• Wireless Audio Frequency Band Start: 606 MHz
• RF Power: 10 mW
• Runtime @Full: 5 h
• Voltage: 1.5 V
• Type: AA
• Channels: 16
• Power Supply: 5VDC
• Power Connector in: USB
• Colour: Black
• Housing: Plastic
• IP Rating: IP20(indoor use only)
• Length (mm): 114 mm
• Weight: 0,033 kg
• Width (mm): 23 mm
• Height (mm): 22 mm
• LED Indicators: Channel select, Power
• Reference Standard: CE
• Included Cables: USB A - Micro USB cable