DAP CA-4500 DSP, 4 Channel DSP Powered Amp
DAP CA-4500 DSP, 4 Channel DSP Powered Amp DAP CA-4500 DSP, 4 Channel DSP Powered Amp DAP CA-4500 DSP, 4 Channel DSP Powered Amp

DAP CA-4500 DSP, 4 Channel DSP Powered Amp

DAP
689,00 €
Sisältää alv. 24.00 %

The DAP CA-4500 DSP amplifier is a 4 x channel high power digital amplifier featuring 500 W per channel into 4Ω.

Toimitusaika 4 - 7 työpäivää
Tuotenumero D4515

DAP CA-4500 DSP, 4 Channel DSP Powered Amp

The DAP CA-series Compact Amplifiers are exactly that! A very compact housed power amplifier with all the necessary features for the contemporary users. Within the family of 4 there are two straight forward 2-channel models of different amplifier power, one 3-channel model which has an included crossover to easily setup a 2.1 configuration, and one 4-channel model which also includes a crossover.

The DAP CA-4500 DSP amplifier is a 4 x channel high power digital amplifier featuring 500 W per channel into 4Ω. In bridge mode it becomes a stereo amplifier delivering 1000 W per channel. Besides this it also can drive 70V and 100V line output which can be selected in the menu. 

The CA-4500 includes a powerful DSP where all parameters can be edited via a built-in OLED screen with an encoder or via a PC using the software editor. DSP functions include 8 band EQ, noise gate, compressor and delay with temperature setting. Working modes and channel routing are also available and can be edited easily as other DSP parameters. The CA-4500 is very compact (1U rack) and light (8kg), so it is a perfect amplifier for high power fixed or mobile applications.

  • 4-channel DSP powered amplifier
  • OLED display and PC configurableSMPS & Class-D Amp Technology
  • Advanced protection circuits
  • Low impedance and 70/100V output

SPECIFICATIONS

Output Power    

  • 4ch 2Ohm: Not Allowed
  • 4ch 4Ohm: 4x 500 Watt RMS
  • 4ch 8Ohm: 4x 250 Watt RMS
  • Bridge 2Ohm: Not Allowed
  • Bridge 4Ohm: Not Allowed
  • Bridge 8Ohm: 2x 1000 Watt RMS
  • Frequency Response: 20Hz – 20KHz, +0/-1dB
  • THD: <0.15%
  • S/N rate: >96 dB A-weighted
  • Crosstalk: >60dB
  • Damping Factor: >180
  • Gain: 34db
  • Input Sensitivity: 0,9-1,1V (+/-1dBv)
  • Input Impedance: 20kOhm balanced, 10kOhm unbalanced
  • Output Mode: 4-channel / Stereo / Bridged
  • Amp Technology: Class D
  • Power Supply: SMPS
  • Protection: 
    • Clip Limiter
    • Short Circuit
    • Overheat
    • Overload
    • Ultrasonic
    • DC Voltage
    • Soft Start
  • Cooling: Forced-air by axial fan
  • Airflow: Front to back
  • Input Connectors: 3-pin XLR
  • Output Connectors: Speakon
  • Power Connector: IEC
  • Input Voltage: 210~240VAC… 50/60Hz
  • Power Consumption: 1100W
  • Dimensions: 483x285x44,5mm (WxDxH)
  • Installation depth: 285mm (excl. conn.)
  • Weight: 5,9Kg