4Hawks Raptor SR/XR for DJI Mavic Air4Hawks
Raptor SR/XR designed for DJI Mavic Air
Raptor range extender increases your drone’s flight range. From now on you can reach up to three times further than with standard antennas. All materials were precisely selected and all elements were designed diligently. The radio transparent radome is made by advanced injection moulding process. Mounting system is made of stainless steel and doesn’t contain any removable parts that can be easy to lose. Thanks to dedicated mechanism, the operator can easily and smoothly adjust tilt of the antenna.
- Maximize performance (XR)
- Concurrent dual band 2.4 & 5GHz
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
DJI Mavic Air is a drone with the power of Mavic Pro and size of Spark. Now you are able to take your drone everywhere without any need to pack big cases with you. Its maximum speed of 65 km/h allows you to quickly reach the place or scenery desired to take an incredible picture or record a video in 4K
4Hawks antenna for Dji Mavic Air model is highly advanced, operating in both 2.4GHz as well as 5GHz frequencies with 8 and 10 dBi gain. The concept behind the look of the antenna was to keep the main merits of Dji Mavic Air, which is its compact size. Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. Mounting is made of stainless steel for rock solid stability. Mounting the range extender leads to permanent changes with the remote controller.
The entire set is lightweight and uniform (without any loose equipment pieces). Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click”. This way you can be sure that you do not lose the connection with your drone.
INCREASE DRONE’S FLIGHT RANGE
- Raptor range extenders have been designed to increase your drone’s flight range, making it even more enjoyable than ever before. All that with a crystal clear video and a very long range that is limited only by your battery.
BREAK PERFORMANCE LIMITS
- Directional antenna allows for an uninterrupted drone flight, free from any interference and noises originating from other devices or networks.
OUTSTANDING ANTENNA BEAM PERFORMANCE
- In comparison to original omnidirectional antennas with weak distance efficiency, 4Hawks’ Raptor patch antenna extends sectoral coverage, increasing the maximum flight range.
OPTIMIZED WAVES PROPAGATION
- Signal is enhanced thanks to efficient waves propagation pointed towards drone.
ALL ACCESORIES INCLUDED
- The entire set is comprised of antenna, dedicated mounting system, pigtails and other required tools to modify your controller.
ADJUSTABLE TILT OF THE ANTENNA
- Each mounting system is able to perfectly adjust the elevation angle as well as to point the antenna precisely to the drone’s current position.
Specification | electrical & mechanical parameters of Raptor range extender.
- Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz
- Port 2: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz
- Port 1: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
- Port 2: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
- 11 dBi (+/- 1 dBi) & 14 dBi (+/- 1 dBi)
- 11 dBi (+/- 1 dBi) & 14 dBi (+/- 1 dBi)
- Port 1: < 1.50 (max. SR: < 2.15, XR: 2.00)
- Port 2: < 1.50 (max. SR: < 2.15, XR: 2.00)
- Port 1: 90°/65° & 55°/55°
- Port 2: 90°/65° & 55°/55°
- Port 1: 70°/40° & 40°/25°
- Port 2: 70°/40° & 40°/25°
- Port 1: Vertical
- Port 2: Vertical
- Port 1: 50 Ohm
- Port 2: 50 Ohm
- Antenna: Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
- Mounting: Stainless steel + paint
- SR: ~ 180g (110g Antenna + 70g Mounting)
- XR: ~ 520g (450g Antenna + 70g Mounting)
- SR: 16.1 x 9.1 x 1.7 cm / 6.34 x 3.60 x 0.67 inch
- XR: 29.2 x 18.2 x 2.1 cm / 11.50 x 7.16 x 0.83 inch
- Port 1: RP-SMA female
- Port 2: RP-SMA female
- Tilt adjustment:
- SR: 5 tilt positions, OnClick system
- XR: 3 tilt positions, OnClick system
- Mounting type: On SMA connectors (Permanent)